Device

New Product Highlight

Advanced Energy Configurable NeoPower NP08 Supplies up to 4000 Watts

Best-in-class power density

NP08 AC-DC configurable power supply introduces best-in-class power density of 18 W/in3. For up to 4000W output power, NP08 is easy to configure (series or parallel) and has 8 output power slots. NP08 can drop into an OEM’s enclosure to make a custom power supply or simply be used for its high flexibility for any embedded or power conversion challenge requiring multiple outputs.

Advanced Energy’s NeoPower (NP) configurable AC-DC AT A GLANCE power supplies provide high power density as either a programmable voltage or current source. The NeoPower configurable will feature an intuitive software interface and user configurable modules to enable fast prototypes. Modules can be connected in series and parallel with the configurable buss bar system to enable 1,000’s of output combinations. The NeoPower is certified for both industrial and medical safety approvals, including compliance to the SEMI F47 standard. The NeoPower supports digital communication with MODBUS RTU for control, monitoring and configuration.

Essential Specifications

Output Power (W):	4000
Length (Inches):	11.2
Width (Inches):	8
Height (Inches):	2.5
Mounting Type:	Configurable
Minimum Output Current (A):	0
Maximum Output Current (A):	448
Output Voltage Range (V):	250
Minimum Output Power (W):	0
Maximum Output Power (W):	448
Maximum Input Voltage (V):	264
Warranty (Years):	5

Front Views

Rear Views

Click to enlarge.

Further Details

Related Products

• µMP Series (Multi-Output, modular power supplies)

	Input voltages:	AC 85 – 264V DC 120 – 350V (limited to 300V DC in medical applications)
	Output power	1,800W max.
	Output voltage per module:	2.0 – 60V (module-internal parallel or serial operation)
	Number of outputs:	12 max.
	• PMBus (Power Management Bus) compatible • Thin type 1U size • Meets various medical and industrial safety standards

• iVS Series (High Output Power)

	Input voltages:	iVS1 & iVS3: AC 90 – 264V single phase, DC 120 – 300V iVS6 & iVS8: AC 170 – 264V 3-phase iVS8H: AC 380 / 480V 3-phase
	Output power:	4,920W max.
	Output voltage per module:	2.0 – 60V (module-internal parallel or serial operation)
	Number of outputs:	24 max.
	Operation temperature:	-40°C to 70°C (ambient)
	Intelligent I²C control of output voltage, output current, output current limitation, temperature monitoring, etc. USB and Controller Area Network (CAN) / RS485 bus connectivity (option)

• iHP Series (High Accuracy and High Output Power)

	Input voltages	180 – 264VAC, 3-phase 342 – 528VAC, 3-phase
	Output power:	24,000W max.
	Output voltage per module:	12 – 250V (Module-internal parallel or serial operation)
	Number of outputs:	8 max
	Cooling:	air cooling (water cooling under development)
	Serial operation: the 250V module, serially attached to medical equipment, supports up to 900V. Parallel operation: Parallel storage up to one rack holding 8 modules max. Up to 6 racks connectable in parallel. Single wire parallel connection. Provides flexible control connectivity via Ethernet, RS-485, etc.

• Open Frame Low Output Power

• Output power: 20 – 360W • The industry’s smallest size (max power density): 2" x 4" ➞ 250W max, 3" x 5" ➞ 360W max. • Remote On/Off • Wide range of multi-channel products • EMI class A or B compatible • Meets various medical and industrial safety standards

• Isolated DC-DC Converters

	Input voltages:	9 – 36V 18 – 36V 18 – 75V 36 – 75V 40 – 160V 250 – 420V
	Output power:	3 – 1kW
	Output voltage:	1.0V – 48V
	• Wide range of brick type, on-board type, etc. • A DC-DC converter for medical equipment is ready for use in railways

• Non-isolated DC-DC Converters (LGA80D)

	Input voltage:	7 – 14V DC
	Output power:	200W max.
	Output voltage:	0.6 – 5.2V DC
	Output method:	Output A: 0.6 – 5.2V / 100W power out Output B: 0.6 – 5.2V / 100W power out Single output: 80A Output 0.6 – 5.2V / 200W power out
	Operation temperature:	-20°C – 85°C
	• A single output can be configured as a four-unit stack (800W power out) • High power density DC-DC converter • Numerous non-isolated DC-DC converters available • Small size: 1" x 0.5" x 0.48" (L x W x H)